Wheatheart X Series 13 Augers User Manual
Page 52
3. A
SSEMBLY
W
HEATHEART
- X13 S
ERIES
A
UGERS
3.11. A
SSEMBLE
THE
A
UGER
F
RAME
X1374, X1384, X1394
52
30787 R1
7. Elevate the frame arm with a support stand placed under the stabilizer cross
member, and place another support stand so it can be used to support the
bowtie end of the lower scissor arms as they are installed.
8. Lift the lower scissors into position, with the narrow ends positioned at the
pins flanges on the 3-piece axle, and the wide ends elevated on the support
stands. Use lower scissor attach pins to attach the narrow ends of the arms
to the flanges on the 3-piece axle, and secure each pin with a 1” SAE washer
and 1/4” x 1-3/4” cotter pin.
Figure 3.20 Installing the Lower Scissors
1” SAE WASHER
1/4” X 1-3/4” COTTER PIN
LOWER SCISSOR
ATTACH PIN
1/4” X 1-3/4” COTTER PIN
1” SAE WASHER
LOWER SCISSOR