Device config tab, Configurable parameters, Rename device – ClearOne Dante Controller User Manual

Page 60: Sample rate, Clear config, Device config

Dante Controller User Guide

-60-

Device Config Tab

This tab on the device view window allows you to configure device specific parameters. The specific
options available will depend on the capabilities of the device. In the case where a device does not support
configuration via Dante Controller, the tab will be disabled.

Note: Dante Virtual Soundcard does not have a Config Tab available on Dante Controller. The Dante
Virtual Soundcard User Interface on the PC or Mac must be used to configure these devices.

Configurable Parameters

Rename Device

Allows you to enter a new Dante 'friendly name' for the device. The text field displays the current name.

To change the device name, enter a new name in the text field and press Enter.

See

Device Names and Channel Labels

for information about name conflicts and device name rules.

Sample Rate

Shows the current sample rate of the device, and allows you to change the operating sample rate of
the Dante device. This may require the device to be rebooted to take effect. All sample rates sup-
ported by the device are shown in the drop down menu.