Changing tx channel labels, Status tab, Device information – ClearOne Dante Controller User Manual

Page 54: Status bar, Mute status, Status

Dante Controller User Guide

-54-

Transmit Flows: The area on the right pane of the tab indicates how many unicast flows are cur-
rently in use, as well as the multicast transmit flows that have been configured on the device. Mult-
icast flows are listed in ID order, including the channels contained within the flow.

Note: Unicast flow details are not displayed in the transmit flow window. The total number of
transmit flows currently in use is shown at the top of the pane. The total number of flows is the sum of
the unicast and multicast flows in use. The maximum number of flows that the device supports is
also shown (32 in the screenshot above).

Changing Tx channel labels

To change a Tx channel label double click on the label and type in a new one. Tx channel labels must be
unique on a single device.

Status Tab

The Status tab is used to obtain current information about a Dante device.

The tab is divided into sections. The information presented on this tab can be very useful when

investigating networking or clocking issues in the system. The Refresh button

can be used to update

this information if required.

Note: Not all Dante devices support the display of all of this information.

Device Information

This provides the following general information about the device: