ClearOne Dante Controller User Manual
Page 49
Dante Controller User Guide
Copyright © 2014 Audinate Pty Ltd. All rights reserved.
-49-
Note: Mac OS X users: Please note that the key combinations shown below are for Windows users.
When using Dante Controller on a Mac, please use the 'Command' or 'Apple' key instead of the Ctrl
key when following the instructions below, and substitute standard Mac key combinations where
applicable – see the Dante Controller menus for details.
The label of the device being viewed is displayed in the middle of the toolbar. In the screenshot above,
FOH-Console is the device being displayed in the drop-down list box.
The device viewed can be changed by selecting another device from the drop-down list.
Multiple Device View windows may be opened from the Network View, so that several devices can be
examined simultaneously.
The Device View has up to six tabs, allowing you to see different information relating to a specific Dante
device:
n
: display and configure device’s receive (Rx) channels
n
: display and configure device’s transmit (Tx) channels including multicast
n
: device software, clock and network status information
n
: view latency histograms (supported devices only)