Events, Filtering the event list, Clearing the event list – ClearOne Dante Controller User Manual
Page 46: Event log icons, Events view
Dante Controller User Guide
Copyright © 2014 Audinate Pty Ltd. All rights reserved.
-46-
Events
The Events tab provides information on significant changes and failures in the network.
Dante Controller continually monitors Dante devices and the network as a whole. It is able to watch for
problematic configurations, unexpected problems and communication failures between itself and Dante
network devices. Events are displayed and stored in an event log.
Events fall into one of three categories: Information, Warning and Error.
Filtering the Event List
Use the drop-down menu at the bottom left of the view to filter the events list.
n
When set to Information, all events are shown.
n
When set to Warning, only warning and error events are shown.
n
When set to Error, only error events are shown.
Clearing the Event List
To clear the event list, click the Clear button. When new events are detected that match the current filter
setting, they are displayed in the event list.
If you have switched to another Network View tab, new events in the event list will also be indicated by a
red Event Log LED icon
in the
. Clicking the LED icon will take you straight to the Events tab
and will clear the Event Log LED.