Network interface configuration guidelines, Primary only (non-redundant) dante network – ClearOne Dante Controller User Manual

Page 26

Text mode
Original mode

Dante Controller User Guide

-26-

To display this dialog at any other time, click the

button in the main toolbar.

Network Interface Configuration Guidelines

Primary only (non-redundant) Dante network

If you only have a primary network, you can only connect one interface to the Dante network.

Example

In the example below, the laptop (running Dante Controller) and the two Dante devices are connected to
the switch via their primary interfaces. This is a typical non-redundant Dante network.

If the laptop has two network interfaces, either can be used.