Profile series v.g1 cylindrical lock, Remove outside lever only, How to change cylinder (if required) – SARGENT Profile Series v.G1.5 Cylindrical Locks User Manual

Page 9: Securing the lock to door

800-810-WIRE (9473) • www.sargentlock.com • A7755A

Profile Series v.G1 Cylindrical Lock

, an A

SSA ABL

Group company

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

1. Insert key, rotate 45° clockwise and hold

2. Depress lever retainer with push pin tool (provided).

7. Remove Outside Lever Only

1. With outside lever in hand- use standard

pliers, pull out cylinder retainer.

2. Remove key and cylinder from lever.

3. Insert new cylinder.*

4. Secure by pressing cylinder retainer

flush with self.*

* NOT SHOWN

How to Change Cylinder
(if required)

45º

Feed wires and
connector in
routed channel

Routed channel for
wood door only

Screws
partially
tightened

1A. If wood door, feed wires up through the

routed channel as shown.

1B. If metal door, feed wire and connector

through inside of door and out hole on
outside of door. *

Attach inside rose assembly and
spacer bushing and secure with
screws shown

6. Securing the Lock to Door

Washers

(only 30- prefix)

Cylinder
Retainer

Cylinder

Outside

Lever

Key