Profile series v.g1 cylindrical lock, General description, Specifications features – SARGENT Profile Series v.G1.5 Cylindrical Locks User Manual

Page 3

800-810-WIRE (9473) • www.sargentlock.com • A7755A

Profile Series v.G1 Cylindrical Lock

, an A

SSA ABL

Group company

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

General Description

Specifications

Features

• Latch –

1/2" standard
3/4" throw fire-rated double doors
(optional) (41- prefix)

• Deadlocking latch

• Outside lever controlled by keypad,

or key retracts latch

• Inside lever retracts latch

• Locks furnished for 1-3/4" doors only

• U.L. Listed

The SARGENT Keypad Cylindrical Lock is designed for areas which require stand alone authorized entry. It is a
self-contained microprocessor-controlled keypad with non-volatile memory. The keypad will hold a total of
100(LK)/2000 (G1-LU, G1-PK, G1-PA, G1-TU, G1-TP, G1-TA) different user codes. User codes “01” & “02” are
utilized for Master Code and Supervisory Code, respectively.

This product is operated by six (6) “AA” alkaline batteries.

• Non volatile memory

• Motor driven, battery operated

• Battery operated with 6 “AA” Alkaline

• Low battery alert–4 chirps after code entry

• External remote “request to enter”

• Master, Emergency or Supervisory code will unlock

door when low battery has expired

• 100 (LK) or 2000 (G1-LU, G1-PK, G1-PA, G1-TU,

G1-TP, G1-TA) users

• Programming done at keypad or with a PDA using

SofLink™ Plus software and a PC (G1-TA & G1-TP
require software)

• RF Fob and Proximity Card, Tag, Fob are optional

• Operates utilizing any two to six digits per code. Digits

may be repeated and codes may start with zero

• Cylinder override

• Entry of three wrong User Codes disables all codes

for ten seconds. Yellow LED on solid

• Piezo horn can be heard with each keystroke or

turned off by Master or Supervisory Code

• Last 15 transactions can be output to portable

print via infrared link (LK Only)

• Last 2000 (Except LK) transactions can be output to

PC via SofLink™ Plus Software