SARGENT Keypad Exit Devices - Manual (Page 8)

8 1-800-810-WIRE • www.sargentlock.com • A7373C
Copyright © 2014, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14
KP Series
Keypad Mortise Lock
Installation Instructions 6
Step #1 – Verify Hand and Bevel of Door
A. Verify Hand and Bevel of Door
Stand on outside/locked side of door when determining the door hand
B. Prepare Door
Prep door according to Instruction Sheet A7454 and appropriate template:
Manufacturer Door Template: 4632
Documents are available at
www.sargentlock.com
LH
Left Hand
Hinges Left
Open Inward
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
RH
Right Hand
Hinges Right
Open Inward
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Fig. 1A
Through-bolt Hole
Outside Cylinder Hole
(76 and 78 Functions)
Lever Handle Hole
Pre-drilled
and/or
Tapped Holes
(2 places)
Mortised
Pocket
Ribbon Cable Hole
(Controller to Keypad)
Inside Cylinder Hole
Thumb Turn Lever Hole
Lever Handle Hole
Outside of Door Inside of Door
Through-bolt Hole
Fig. 1B Wood Door Preparation