Tweco 102 Cutmaster - Manual (Page 17)

CUTMASTER 102
Manual 0-4997 INTRODUCTION 2-3
2.05 Input Wiring Specifications
CutMaster 102 Power Supply Input Cable Wiring Requirements
Input
voltage
Freq Power
Input
Suggested Sizes
Volts Hz kVA I max I1eff Fuse
(amps)
Flexible Cord
(Min. AWG)
1
Phase
208 50/60 20.6 99 76 100 4 Type W
230 50/60 21.9 95 74 100 4 Type W
460 50/60 27.6 60 46 60 6
3
Phase
208 50/60 17.7 49 38 60 6
230 50/60 17.9 45 36 60 6
380 50/60 18.4 28 22 32 10
400 50/60 18.7 27 22 32 10
460 50/60 23.1 29 22 30 10
600 50/60 22.8 22 17 25 12
Line Voltages with Suggested Circuit Protection and Wire Sizes
Based on National Electric Code and Canadian Electric Code
NOTE
Refer to Local and National Codes or local authority having jurisdiction for proper wiring requirements.
The suggested sizes are based on flexible power cable with power plug installations. For hard-wired installations
refer to local or national codes.
I1max is taken at TDC rated minimum duty cycle.
I1eff is taken at TDC 100% rated duty cycle.