Cisco 7912G - Manual (Page 99)

5-3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 5 Configuring Telephony Features
Caller ID Displays the telephone number and the name
of the caller. For more information, refer to:
• Cisco Unified CallManager
Administration Guide,
“Configuring Cisco Unified IP
Phones” chapter.
• Cisco Unified CallManager
System Guide,
“Understanding Route Plans”
chapter.
• Cisco Unified CallManager
Features and Services Guide,
“Call Display Restrictions”
chapter.
Conference Allows a user to talk simultaneously with
multiple parties by calling each participant
individually. For more information, refer to
Cisco Unified CallManager System
Guide, “Cisco Unified IP Phones”
chapter.
Direct transfer Connects two established calls (calls that are
on hold or in connected state) into one call and
drops the feature initiator from the call. Does
not initiate a consultation call and does not put
the active call on hold. Refer to Cisco Unified
CallManager System Guide.
Table 5-1 Configuring Telephony Features for Cisco Unified IP Phone 7905G/7912G Using Cisco
Unified CallManager Administration (continued)
Feature Description Reference