Cisco 7912G - Manual (Page 102)

Chapter 6 Viewing Model and Status Information on the Cisco Unified IP Phone
Viewing Model Information
6-2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Viewing Model Information
You can verify the model and serial number of Cisco Unified IP Phones 7905G
and 7912G by viewing the Model Information screen.
To view this screen, follow these steps:
Procedure
Step 1 Press the Menu button.
Step 2 Choose Settings > Model Information.
Step 3 Use the Navigation button to display the information in the Model Information
screen.
Table 6-1 describes the information that appears in this screen.
To exit the Model Information screen, press the Exit softkey.
Viewing Status Messages
To access the Status menu, choose Status from the Settings menu.
The Status menu contains the following options, which provide information about
the phone and its operation:
• Status Messages—Reserved for future use.
Table 6-1 Model Information Screen Items
Item Description
Model Number Model number of the phone
MAC Address MAC address of the phone
AppLoadID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory-installed load running on the
phone
Serial Number Serial number of the phone