Viewing network settings through a phone – Cisco 7912G User Manual
Page 96

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Viewing Network Settings through a Phone Configuration Web Page
4-22
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Viewing Network Settings through a Phone
Configuration Web Page
You can view (but not set) network configuration parameters for a
Cisco Unified IP Phone 7905G and 7912G from the Phone Configuration Web
Page.
To access the Phone Configuration Web Page for a phone, follow these steps:
Procedure
Step 1
Open a web browser and enter the following URL, where IPaddress is the IP
address of your phone:
Step 2
http://IPaddress
On the Cisco Unified IP Phone 7905G and 7912G, you can determine the IP
address by pressing the Menu button, choosing Settings > Network
Configuration, and then scrolling to IP Address.
For example, the Phone Configuration Web Page for a Cisco Unified IP Phone
with the IP address 192.168.3.225 is http://192.168.3.225
Step 3
Press Enter.
The Phone Configuration Web Page appears.
For a complete list of parameters and descriptions of each parameter, see