Sip configuration menu parameter descriptions – Cisco 7912G User Manual
Page 93

4-19
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
SIP Configuration Menu Parameter Descriptions
SIP Configuration Menu Parameter Descriptions
describes SIP configuration parameters. To access the SIP
Configuration menu, choose SIP Configuration from the Settings menu.
Note
The Edit, Yes, or No softkeys for changing SIP configuration parameters appear
only if options are unlocked as described in the
“Unlocking and Locking Options
on the Network Configuration Menu” section on page 4-3
. For information about
the keys you can use to edit parameters, see the
“Editing Settings in the Network
Configuration Menu” section on page 4-5
.
Table 4-2
SIP Configuration Menu Parameters
Parameter
Description
To Change
SIP Proxy 1
SIP Proxy 2
SIP Proxy 3
SIP Proxy 4
SIP Proxy 1 and SIP Proxy 2
accept either the IP address or URL
of the SIP proxy server used by the
phone.
SIP Proxy 3 and SIP Proxy 4
accept only the IP address used by
the phone.
1.
Unlock configuration parameters.
2.
Scroll to the SIP Proxy parameter, press
the Edit softkey, and then enter the IP
address or URL of a SIP proxy server.
3.
Press the Accept softkey, and then press
the Save softkey.
User ID
User ID for registration and
authentication of the phone.
1.
Unlock configuration parameters.
2.
Scroll to the User ID parameter, press the
Edit softkey, and then enter a user ID.
3.
Press the Accept softkey, and then press
the Save softkey.
Password
Password for authentication of the
phone.
1.
Unlock configuration parameters.
2.
Scroll to the Password parameter, press
the Edit softkey, and then enter a
Password.
3.
Press the Accept softkey, and then press
the Save softkey.