Cisco 7912G User Manual
Page 89
4-15
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu Parameter Descriptions
Admin. VLAN ID
Auxiliary VLAN in which the
phone is a member.
Overrides the value specified by
the Operation VLAN ID
parameter.
1.
Unlock configuration parameters.
2.
Scroll to the Admin. VLAN ID
parameter, press the Edit softkey,
and then enter a new Admin VLAN
value.
3.
Press the Validate softkey, and then
press the Save softkey.
VLAN Enabled
Indicates whether VLAN is
enabled for the phone.
1.
Unlock configuration parameters.
2.
Scroll to the VLAN Enabled
parameter and press the No softkey to
disable VLAN, or press the Yes
softkey to enable VLAN.
3.
Press the Save softkey.
CDP Enabled
Indicates whether Cisco Discovery
Protocol (CDP) is enabled for the
phone. CDP allows the phone to be
discovered by the CiscoWorks
network management system.
For more information about
CiscoWorks2000, refer to the
documentation available at this
URL:
ttp://www.cisco.com/univercd/cc
/td/doc/product/rtrmgmt/cw2000/i
ndex.htm
1.
Unlock configuration parameters.
2.
Scroll to the CDP Enabled parameter
and press the No softkey to disable
CDP, or press the Yes softkey to
enable CDP.
3.
Press the Save softkey.
Table 4-1
Network Configuration Menu Parameters (continued)
Parameter
Description
To Change