Network configuration, Network – Cisco 7912G User Manual
Page 126

Appendix A Reference List of Parameters
Network Configuration
A-4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Network Configuration
The Network Configuration area of the Cisco Unified IP Phone Configuration
Web Page displays network configuration information and information about
other phone settings.
describes these items.
Note
You can obtain and set many of these items from phone itself. For more
information, see
Chapter 4, “Configuring Settings on the Cisco
To display the Network Configuration area, perform either of these steps:
•
Access the web page for the phone as described in the
Settings through a Phone Configuration Web Page” section on page 4-22
and
then click the Network Configuration hyperlink.
•
In a web browser, enter this URL: ip-address/NetworkConfiguration, where
ip-address is the IP address of the phone.
Product ID
Product identifier of the phone
H/W features
Reserved for future use
BTXML cards version
Version of the graphics card in the phone
Configuration version
stamp
Version of the phone configuration file
Table A-1
Device Information Area Items (continued)
Item
Description
Table A-2
Network Configuration Area Items
Item
Description
DHCP server
If DHCP is enabled, the DHCP server that the pone
contacts
BOOTP server
Not used
MAC address
Unique MAC address of the phone
Host name
Unique host name assigned to the phone