Cisco 7912G - Manual (Page 144)

Appendix A Reference List of Parameters
Configuration Parameters
A-22
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Call Preference Parameters
Table A-7 describes the call preference parameters that you can view through a
phone’s profile or through the Call Preferences area on the phone’s web page.
These parameters specify various user features on the phone.
Tip To access the Call Preferences area directly from a web browser, enter
IP_address/CallPrefConfiguration, where IP_address is the IP address of your
Cisco Unified IP Phone.
Table A-7 Call Preference Parameters
Parameter Description
Allow Call Waiting
(on web page)
CallWaiting
(in profile)
Whether the call waiting feature is enabled on a phone.
• 0=Disable the call waiting feature.
• 1=Enable the call waiting feature.
Value type: Boolean.
Default value: 1
Allow Call Transfer
(on web page)
AttendedTransfer
(in profile)
Whether the call transfer feature is enabled on a phone. If this feature is
enabled, the Trnsfer softkey will appear when appropriate, allowing a user to
transfer a call. If this feature is disabled, this softkey will never be available.
• 0=Disable the call transfer feature.
• 1=Enable the call transfer feature.
Value type: Boolean.
Default value: 1
Allow Blind Transfer
(on web page)
BlindTransfer
(in profile)
Whether the blind call transfer feature is enabled on a phone. If this feature is
enabled, the BlndXfr softkey will appear when appropriate, allowing a blind
transfer of a call. If this feature is disabled, this softkey will never be available.
• 0=Disable the blind call transfer feature.
• 1=Enable the blind call transfer feature.
Value type: Boolean.
Default value: 1