Cisco 7912G - Manual (Page 146)

Appendix A Reference List of Parameters
Configuration Parameters
A-24
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Voice Mail Number
(on web page)
VoiceMailNumber
(in profile)
Specifies a telephone number where voice messages are stored and retrieved.
If a number (other than 0) is specified:
• The Message softkey will appear on the phone when appropriate.
• Incoming calls forward to this number if the phone is busy or if the calls
are not answered within the number of seconds specified with the Forward
to VMail Delay(s) parameter.
Value type: Alphanumeric string, up to 31 characters.
Default value: 0 (disables this feature)
Call Forward Number
(on web page)
CallForwardNumber
(in profile)
Specifies a telephone number to which all calls to the phone are forwarded. If
a number (other than 0) is specified, the Call Forward All feature is activated.
Value type: Alphanumeric string, up to 31 characters.
Default value: 0 (disables call forwarding)
Call Forward on Busy
Number (on web
page)
CallForwardOnBusy
Number (in profile)
Specifies a telephone number to which calls to the phone are forwarded if the
phone is busy. If a number (other than 0) is specified, the Call Forward On
Busy feature is activated.
Value type: Alphanumeric string, up to 31 characters.
Default value: 0 (disables call forwarding on busy)
Display Name
(on web page)
DisplayName
(in profile)
Specifies a name to be used as part of the phone’s caller ID and that will be
displayed on the phone’s LCD screen. A 0 (zero) or a blank value disables this
feature.
Note If the Block Caller ID parameter is set to Yes, outgoing calls will use
“Anonymous” as the phone’s caller ID regardless of the Display Name
setting.
Value type: Alphanumeric string, up to 31 characters.
Default value: blank (no character string)
Table A-7 Call Preference Parameters (continued)
Parameter Description