Cisco 7912G - Manual (Page 136)

Appendix A Reference List of Parameters
Configuration Parameters
A-14
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
VLANSetting Specifies various
VLAN settings. Bit map, as follows:
• Bits 0–2—Designate 802.1Q priority for signalling IP
packets.
• Bits 3–5—Designates 802.1Q priority for audio voice
IP packets.
• Bits 6–17—Reserved for future use.
• Bits 18–29—User-specified 802.1Q VLAN id.
• Bits 30–31—Reserved for future use.
The default setting is 0x0000002b.
TOS ToS (Type of Service)
bits. Specifies the
precedence and delay
of Audio and Signaling
IP packets. Higher
values increase routing
priority for data
packets, resulting in
less latency. • Bits 0-7: ToS value for audio data packets. Range:
0-255; Default: 184
• Bits 8-15: ToS value for signaling data packets. Range:
0-255; Default: 104
• Bits 16-31: Reserved
Value type: Bitmap.
Default value:0x000068b8
Table A-4 Network Parameters (continued)
Parameter Description Usage