Cisco 7912G - Manual (Page 138)

Appendix A Reference List of Parameters
Configuration Parameters
A-16
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Table A-5 SIP Parameters
Parameter Description
UID, PWD User ID and password for registration and authentication. Authentication can
be performed on the (UID, PWD) pair or on the (LoginID, PWD) pair
depending on the UseLoginID flag. However, the phone identifies itself to the
outside world with the UID only and can be reached only with the
corresponding UID but not the LoginID. If UID is set to “.” or to “0” (zero),
the phone is disabled (does not register with the proxy server).
Value type: Alphanumeric string.
Default value: UID=123, PWD=0
Proxy 1-4 SIP proxy server.
SIP Proxy 1 and SIP Proxy 2 accept either the IP address or URL of the SIP
proxy server used by the phone.
SIP Proxy 3 and SIP Proxy 4 accept only the IP address used by the phone.
Value type: Alphanumeric string.
Default value: 0
UseLoginID Specifies which value to use for authentication:
• 0=Use UID for authentication.
• 1=Use LoginID for authentication.
Value type: Boolean.
Default value: 0
LoginID Alternate user name used for authentication.
Value type: Alphanumeric string.
Default value: 0
SIPRegInterval SIP registration interval, in seconds, between each registration renewal to the
SIP proxy server. If set to 0, the phone uses the default value.
The value can range from 0 to 86400.
Value type: Integer.
Default value: 3600