Cisco 7912G User Manual
Page 91

4-17
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu Parameter Descriptions
Alternate TFTP
Indicates whether the phone
obtains the IP address or URL of
the TFTP server from the DHCP
server (No) or uses the IP address
or URL specified by the TFTP
Server parameter (Yes).
If you set the Alternate TFTP
server to Yes, you must specify a
value for the TFTP Server
parameter.
1.
Unlock configuration parameters.
2.
Scroll to the Alternate TFTP
parameter and press the Yes softkey
if the phone should use an alternative
TFTP server. Press the No softkey
otherwise.
3.
Press the Save softkey.
Alternate DNS
Indicates whether the phone
obtains the IP address of the DNS
server from the DHCP server (No)
or uses the IP addresses specified
by the DNS Server 1 and,
optionally, the DNS Server 2
parameters (Yes).
If you set the Alternate DNS server
to Yes, you must specify a value for
the DNS Server 1 parameter. You
may also specify a value for the
DNS Server 2 parameter.
1.
Unlock configuration parameters.
2.
Scroll to the Alternate DNS
parameter and press the Yes softkey
if the phone should use an alternative
DNS. Press the No softkey otherwise.
3.
Press the Save softkey.
Alternate NTP (not
applicable in a
Cisco Unified
CallManager
environment)
Indicates whether the phone
obtains the IP address of the NTP
server from the DHCP server (No)
or uses the IP addresses specified
by the NTP Server 1 and,
optionally, the NTP Server 2
parameters (Yes).
If you set the Alternate NTP server
to Yes, you must specify a value for
the NTP Server 1 parameter. You
may also specify a value for the
NTP Server 2 parameter.
1.
Unlock configuration parameters.
2.
Scroll to the Alternate NTP
parameter and press the Yes softkey
if the phone should use an alternative
NTP server. Press the No softkey
otherwise.
3.
Press the Save softkey.
Table 4-1
Network Configuration Menu Parameters (continued)
Parameter
Description
To Change