Tweco A80-A120 CutMaster - Manual (Page 83)

CUTMASTER A80, A120
Manual 0-5119 PARTS LIST
6-1
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
Section "6.03 Power Supply Replacement"
Section "6.04 Replacement Power Supply Parts"
Section "6.05 Options and Accessories"
Section "6.06 Torch Replacement Parts SL100SV Torch (with Solenoid on Mounting Tube)"
Section "6.07 Torch Consumable Parts (SL100)"
Section "6.08 Replacement Parts for Hand Torch"
NOTE
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper autho-
rization will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in the
parts list for each type item. Also include the model and serial number of the power supply. Address all inqui-
ries to your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable,
gas pressure regulator / filter, and operating manual.
Qty Description Catalog #
1 CutMaster A80 400VAC, Non CE Power Supply
With 400V, 3 Phase input power cable 3-1334-3
1 CutMaster A120 400VAC, Non CE Power Supply
With 400V, 3 Phase input power cable 3-1734-3
1 CutMaster A80 400VAC, CE Power Supply
With 400V, 3 Phase input power cable 3-1334-4
1 CutMaster A120 400VAC, CE Power Supply
With 400V, 3 Phase input power cable 3-1734-4