Tweco A80-A120 CutMaster - Manual (Page 13)

CUTMASTER A80, A120
Manual 0-5119 GENERAL INFORMATION
1-7
1.08 Statement of Warranty
LIMITED WARRANTY: Subject to the terms and conditions established below, Victor Technologies, Inc. warrants to the original
retail purchaser that new Victor Thermal Dynamics CUTMASTER™ plasma cutting systems sold after the effective date of this
warranty are free of defects in material and workmanship. Should any failure to conform to this warranty appear within the
applicable period stated below, Victor Technologies, Inc. shall, upon notification thereof and substantiation that the product has
been stored operated and maintained in accordance with Victor Thermal Dynamics’ specifications, instructions, recommendations
and recognized industry practice, correct such defects by suitable repair or replacement.
This warranty is exclusive and in lieu of any warranty of merchantability or fitness for a particular purpose.
Victor Thermal Dynamics will repair or replace, at its discretion, any warranted parts or components that fail due to defects in
material or workmanship within the time periods set out below. Victor Technologies, Inc. must be notified within 30 days of any
failure, at which time Victor Technologies, Inc. will provide instructions on the warranty procedures to be implemented.
Victor Technologies, Inc. will honor warranty claims submitted within the warranty periods listed below. All warranty periods
begin on the date of sale of the product to the original retail customer or 1 year after sale to an authorized Victor Thermal Dynamics
Distributor.
LIMITED WARRANTY PERIOD
Product
Power Supply Components
(Parts and Labor)
Torch and Leads
(Parts and Labor)
U.S. Non U.S.
CUTMASTER™ A40 4 Years 3 Years 1 Year
CUTMASTER™ A60 4 Years 3 Years 1 Year
CUTMASTER™ A80 4 Years 3 Years 1 Year
CUTMASTER™ A120 4 Years 3 Years 1 Year
This warranty does not apply to:
1. Consumable Parts, such as tips, electrodes, shield cups, o-rings, starter cartridges, gas distributors, fuses, filters.
2. Equipment that has been modified by an unauthorized party, improperly installed, improperly operated or misused based
upon industry standards.
In the event of a claim under this warranty, the remedies shall be, at the discretion of Victor Technologies, Inc.
1. Repair of the defective product.
2. Replacement of the defective product.
3. Reimbursement of reasonable costs of repair when authorized in advance by Victor Thermal Dynamics.
4. Payment of credit up to the purchase price less reasonable depreciation based on actual use.
These remedies may be authorized by Victor Thermal Dynamics and are FOB West Lebanon, NH or an authorized Victor Thermal
Dynamics service station. Product returned for service is at the owner’s expense and no reimbursement of travel or transportation
is authorized.
LIMITATION OF LIABILITY: Victor Thermal Dynamics shall not under any circumstances be liable for special or consequential
damages such as, but not limited to, damage or loss of purchased or replacement goods or claims of customer of distributors
(hereinafter “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive and the liability of
Victor Thermal Dynamics with respect to any contract, or anything done in connection therewith such as the performance or breach
thereof, or from the manufacture, sale, delivery, resale, or use of the goods covered by or furnished by Victor Thermal Dynamics
whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided
herein, exceed the price of the goods upon which liability is based.
This warranty becomes invalid if replacement parts or accessories are used which may impair the safety or performance of any
Victor Thermal Dynamics product.
This warranty is invalid if the Victor Thermal Dynamics product is sold by non - authorized persons.
Effective September 4, 2007