tekmar 161 Setpoint Control User Manuals - Manual (Page 8)

© 2007 U 161 - 08/07 8 of 12
View the Floor Temperature
The measured floor temperature is shown in the View
menu.
1. Press the Item button until the floor temperature is
located.
View the Set Floor Temperature
Floor Heating Operation
The desired floor temperature is shown in the View
menu.
1. Press the Item button until the set floor temperature
is located.
Adjust the Set Floor Temperature
The desired floor temperature can be changed while in
the Adjust menu.
When following a programmable schedule, only the
Occupied temperature can be set.
While in the Unoccupied period or in the Away scene,
the floor is not heated.
Important: The setpoint control does not heat the floor when the temperature is set to
OFF. The OFF setting is not recommended if the floor has the potential to freeze.
1. Press the Menu button to enter the Adjust menu.
2. Press the Up or Down button to change the Set Floor (Occupied) temperature.