tekmar 161 Setpoint Control User Manuals - Manual (Page 5)

5 of 12 © 2007 U 161 - 08/07
View the Hot Tub Temperature
The measured hot tub temperature is shown in the View
menu.
1. Press the Item button until the hot tub temperature is
located.
View the Set Hot Tub Temperature
The desired hot tub temperature is shown in the View
menu.
1. Press the Item button until the set hot tub temperature
is located.
Adjust the Hot Tub to Heat or Off
Hot Tub Operation
The setpoint control includes a mode setting that allows
the hot tub to be shut off and no longer heated. This
allows the hot tub to be drained or serviced.
Power to the setpoint control should never be removed.
Removing power will cause error messages when
connected to a tN4 system.
To shut off the hot tub:
1. Press the Menu button to enter the Adjust menu.
2. The first item is Mode.
3. Press the Down button to change Mode to OFF.
To resume heating the hot tub:
1. Press the Menu button to enter the Adjust menu.
2. The first item is Mode.
3. Press the Up button to change Mode to HEAT.