tekmar 161 Setpoint Control User Manuals - Manual (Page 4)

© 2007 U 161 - 08/07 4 of 12
Continue to next Menu
Continue to next Item
View the Setpoint Temperature
The measured setpoint temperature is shown in the
View menu.
1. Press the Item button until the setpoint temperature is
located.
View the Set Setpoint Temperature
Setpoint Operation
The desired setpoint temperature is shown in the View
menu.
1. Press the Item button until the set setpoint temperature
is located.
Adjust the Set Setpoint Temperature
The desired setpoint temperature can be changed while
in the Adjust menu.
When following a programmable schedule, only the
Occupied temperature can be set.
While in the Unoccupied period or the Away scene, the
setpoint load is not heated.
Important: The setpoint control does not heat the setpoint load when the
temperature is set to OFF. The OFF setting is not recommended if the setpoint
load has the potential to freeze.
1. Press the Menu button to enter the Adjust menu.
2. Press the Up or Down button to change the Set Setpoint (Occupied) temperature.