User interface – tekmar 161 Setpoint Control User Manuals User Manual
Page 3

3 of 12
© 2007
U 161 - 08/07
The control uses a Liquid Crystal Display (LCD) as the method of supplying
information on the operation of the Setpoint Control.
Access Levels
This setpoint control has five access levels:
•
•
ADV (Advanced)
•
•
INST (Installer)
•
•
USEr (User)
•
•
LTD (Limited)
•
•
SEC (Secure)
This brochure only covers the features available in the SEC, LTD and USEr levels.
Only qualified service people should adjust the INST and ADV access levels.
Menu
All of the items displayed by the setpoint control are organized into five menus:
•
•
View
•
•
Adjust
•
•
Scene
•
•
Schedule
•
•
Miscellaneous
User Interface
These menus are listed in the Menu Field on the top left hand side of the display.
Use the Menu button to advance to the next menu.
Item
Each menu has several items. The abbreviated name of the selected item will be
displayed in the item field of the display. To view the next available item, press and
release the Item button.
Adjustment
To make an adjustment to a setting in the setpoint control:
1.
Use the Menu button to select the appropriate menu.
2.
Use the Item button to select the desired item.
3.
Use the Up or Down button to adjust the setting.
Default Item
When you display an item in the View menu for more than 5 seconds it becomes
the default item. After you navigate other menus, the display reverts back to the
default item after 60 seconds of button inactivity.