Cisco XR 12404 User Manual

Page 120

Chapter 4 Troubleshooting the Installation

Troubleshooting the Processor Subsystem

4-22

Cisco XR 12404 Router Installation Guide

OL-13830-02

Table 4-6

Dual PRP-3 Scenario

LED Display

Description or Console Message

INIT/NV

Displays the LED message during the initialization of the NVRAM infra code.

02A8/HW

OK/RIO

LED message displayed immediately after the board is powered on.

OK/CPU

SENT/RPT

Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".

INIT/MEM

Displays "Discovering memory in slot DIMM1 ......................... Found 2GB
DIMM

Discovering memory in slot DIMM2 ......................... Found 2GB DIMM"

TEST/MEM

Displays "Testing low memory ....................................... OK

Loading main ROMMON image ................................ OK

Verifying loaded image ................................... OK

Load succeeded; launching target ......................... OK"

LNCH/RMON

Displays “Cisco ROMMON System Bootstrap, Version 0.16.0 (bld1)
DEVELOPMENT SOFTWARE

Compiled on 08/27/08 at 15:04:49 PDT [BLD-rommon]

MPC8641D platform with 4 GB of main memory"

RDY/RP

PWRD

DISPLAYS "Loading disk0:c12k-os-mbi-3.8.0.15I/mbiprp-rp.vm (14809672
bytes)... !!!"

Tip

Instead of RDY/RP, sometimes PWRD is displayed in the normal
booting process.

todd.book Page 22 Monday, March 16, 2009 2:47 PM