Glyph GPM-216 - Manual (Page 33)

Glyph GPM-216
33
Channel Volume and Pan Settings
You can set an initial volume and pan setting for each channel that is assigned to an input. Later,
volume and pan settings can be changed using the GPM unit user interface. These can then be saved using
a menu option on the GPM unit in Setup mode.
Volume is set on a scale of 0 to 100.
Pan sets the stereo position of the input. A percentage of the input is assigned to the left and right
channels. The default is to set 50% to the left channel and 50% to the right channel ("50<>50"). This setting
will place the input dead center in the mix. Setting the input 100% in the left channel and 0% in the right
("100<>0") will place the input full to the left. Setting the source 0% in the left channel and 100% in the
right ("0<>100") will place the input full to the right. We will leave it to you to work out the effects of the
other settings.
The format "50<>50" matches the way the pan setting is displayed on the GPM unit.
Figure 17: Channel Volume and Pan Settings.