Glyph GPM-216 - Manual (Page 21)

Glyph GPM-216
21
practice, you might want to name the profile “Practice”. If you are setting up for a recording session, you
might want to name the profile “Recording”. In our example we’ll name it “Test”.
Figure 3: Configure All Units
Blink Unit
On the far left side of the Configure All Units page, you’ll see the Blink Unit button. When you click this
button, the corresponding unit will blink the LEDs on the selector buttons.
System name
When several units are booted up for the first time, they are given a default name so you can determine
which is which. The naming convention is “GPMXXX” where “XXX” is a random number. In our
example, the units are named GPM462 GPM282, GPM968 and GPM443. Use the Blink Unit button to
determine which unit is which, and name them something that makes sense as to which instrument or
person will be using the unit. In our example they will be named John, Paul, George and Stan.
Local input
The GPM-216 has two local inputs on the front of the unit. From the perspective of the network, these
inputs can be configured as one stereo source, one mono source, two mono sources, or no local sources.
In our example all units will have two mono inputs.