Glyph GPM-216 - Manual (Page 17)

Glyph GPM-216
17
In Setup mode the Function knob selects between many functions that enable you to configure the GPM,
save settings permanently, select between stored profiles, troubleshoot the system and more.
Setup Mode consists of two sections of informational displays as well as several operational utility
functions.
The two informational displays can be reached by entering Setup Mode and rotating the Function knob
until the screen displays the headings of MIX: Info or SYSTEM:Info
MIX: Info:
The informational displays in this section are switched between by pressing the lighted selector buttons as
follows:
1. Unit Name (the current name of the GPM unit)
2. Current profile name
3. Current Input designation (two mono inputs, one mono, stereo, etc.)
4. Software Build number
SYSTEM: Info:
The informational displays in this section are also switched between by using the lighted selector buttons as
follows:
1. IP address (the network address of the unit)
2. Current CPU usage
3. Max CPU usage
4. Jack Xrun Total (a troubleshooting diagnostic statistic)
5. CPU Temperature (a troubleshooting diagnostic)
6. Operating System Build number
7. Hardware Build number
8. Save Diag (pressing the button labeled Save generates a diagnostic log file for troubleshooting
purposes – should only be used at the direction of Glyph technical support)
Setup Mode Functions:
Rotating the Function knob while in Setup Mode will make available the following options and utilities:
Save Settings:
Pressing the Save button will save the current Volume and Pan settings to the Current Profile.
Remote Config: