Glyph GPM-216 - Manual (Page 28)

Glyph GPM-216
28
You can backup a GPM profile from the GPM unit to your computer (Backup Profile). You can download a
backed up profile from your computer to the same GPM unit or to a different GPM system (Download
Profile). You can also edit or delete profiles stored on the GPM unit (Delete Profile).
In addition to profile management, the configuration wizard can be used to upload diagnostic logs under
the direction of Glyph technical support and to download software updates to the GPM unit.
New Profile
New Profile is used to create a GPM unit configuration profile. The profile is stored on the GPM unit. You
can create more than one GPM profile and switch between them by using Set Current Profile.
Each profile stored on a GPM unit must have a unique name.
The profile contains a GPM unit name. Each GPM unit on a GPM network must have a unique name. If
there are other configured GPM units on the network, configuration wizard will check to be sure that there
are no other units with the name you enter. This name will be used to identify your local audio inputs on
your GPM unit as well as on other GPM units connected to the network.
In addition, you must select the number and type of local audio inputs that will be included in the audio
mix for this GPM unit and other GPM units on the network.
Finally, you can set the state of phantom power on the GPM unit. Phantom power can be used to provide
power to microphones connected to the GPM unit. Phantom power setting affects both inputs on the GPM
unit. You cannot set phantom power on just one input.