Glyph GT 060BR - Manual

GT 060BR Quickstart
FireWire 800
Hardware RAID 0
Your GT 060BR came with the following parts: FireWire 800 cable (9-pin to 9-pin), power cable, feet.
In addition you received a CD with documentation, registration info, drivers, etc.
Features at a Glance
• Interfaces: (2) FireWire 800 (9-pin “S800”)
• RAID Support: The GT 060BR is a RAID 0 system. RAID 0 is also called “striping”. In the GT 060BR, two disks
work together to get more speed than a single disk can achieve alone. The intelligence is built into the hardware
itself, so there is no configuration software needed.
• Enclosure: Steel construction, Internal power supply and quiet fan
• Warranty: 3 Years, 1 st Year Overnight Advance Replacement Policy
Compatibility
• Mac OS
FireWire 800 requires OS 10.2.5 or later; FireWire 400 requires OS 8.6 or later
• Windows
FireWire 800 requires Windows 2000/XP
FireWire 400 requires Windows ME/2000/XP
Frequently Asked Questions
Q: Do I need any drivers to use the GT 060BR?
No drivers are required for Mac or PC. Your computer must have a FireWire port.
Q: How do I connect the GT 060BR to my FireWire 800 equipped computer?
Use the supplied FireWire 800 9-pin to 9-pin cable. One end goes to the “S800” port on the drive; the other goes to the
FireWire 800 port on your computer.
Q: How do I connect the GT 060BR to my FireWire 400 equipped computer?
Connect the “S800” port on the drive to a FireWire 400 port on your computer using a 9-pin to 6-pin Bilingual cable (see
below).
Q: I’m still running Mac OS 9 or Win/ME. Can I still use the GT 060BR?
Yes. You can connect the “S800” port on the drive to your OS 9 or Win/ME computer using a 9-pin to 6-pin Bilingual cable.
You can use the “S800” port on the GT 060BR when you want to connect to a FireWire 800 equipped computer at a later
date.
Q: Do I need RAID software?
RAID software is not needed because the RAID intelligence is built into GT 060BR hardware. Just plug your GT 060BR into
your FireWire port, and it should appear as one large volume. Instructions for re-initializing your drive are on your Glyph
documentation CD and on the Glyph website.