E-flite Divo 3D - Manual (Page 23)

23 E-flite Divo 3D Profile Assembly Manual
 8. Use hot glue to secure the rudder and elevator servos
in the fuselage.
Note: Before mounting the rudder servo. Slot the vertical
fuselage for the tabs on the rudder servo or cut the
mounting tabs off of the rudder servo.
 9. Slide the control horn through the rudder, then slide
the control horn locking plate onto the horn, pressing it
tight against the rudder to secure the control horn. Apply
a few drops of foam-safe CA to the junction between the
horn and locking plate to secure its position.