E-flite Divo 3D - Manual (Page 13)

13 E-flite Divo 3D Profile Assembly Manual
 4. Use foam-safe CA to glue the bottom wing to the
vertical fuselage. Use a square to make sure the wing is
aligned to the fuselage while the glue cures.
 5. Use foam-safe CA to glue the cabane struts to the
bottom wing. The struts will be square to the bottom wing
when they are glued as well.
 6. Glue the top wing to the cabane struts and vertical
fuselage. A narrow board will keep the bottom wing flat
when gluing the top wing and avoid any possibilities of
twisting the wings.