E-flite Divo 3D - Manual (Page 11)

11 E-flite Divo 3D Profile Assembly Manual
 9. Carefully work on gluing the horizontal fuselage
to the vertical fuselage. Also glue the horizontal fuselage
stiffener to the horizontal fuselage. Use a square to
make sure the two remain properly aligned to each other
while gluing.
 10. Position the fuselage stiffeners as shown. They will
rest on the triangular fuse braces at the front of the
fuselage. Again, use foam-safe CA and work slowly
while gluing to keep the horizontal and vertical fuselage
pieces square to each other.