Banner SI-QM100 Locking Style Switches - Manual (Page 8)

Model Size Thread Conversion Dimensions Used With
Switches
RP-QM90 Rope Pull Switches
One conduit adapter is supplied with each switch.
Accessory Actuators
Model Application Dimensions
SI-QM-SMFA Inline Flexible Metal
40 mm
(1.6")
29 mm
(1.1")
CL
50 mm
(2.0")
81 mm
(3.2")
41 mm
(1.6")
ø 5.5 mm
(0.22")
Model Application Dimensions
SI-QM-SB
Rigid in-line metal actuator used for doors or covers. Slide-
bolt design for use in heavy-duty applications where align-
ment is difficult to maintain.
40.0 mm
(1.60")
3.0 mm
(0.13")
9.6 mm
(0.40")
20.0 mm
(0.80")
59.0 mm
(2.30")
20.0 mm
(0.80")
100.0 mm
(3.9")
140.0 mm
(5.50")
42.0 mm
(1.70")
38.0 mm
(1.50")
Ø8 mm hole
for locking bolt
in the open
position
31.0 mm
(1.20")
47.0 mm
(1.90")
4x Ø5.5 mm (0.20")
WARNING: Spare Actuators
Spare actuators must NEVER be used to bypass or otherwise defeat the protective function of a safety
switch. To do so may create an unsafe situation which could lead to serious injury or death.
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-
CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-
SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-
RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.
Machine Safety Switches
www.bannerengineering.com - tel: 763-544-3164