Interface modules, Contactors, Lens shield – Banner EZ-SCREEN Safety Light Curtain Systems User Manual
Page 60
Interface Modules
Provide forced-guided, mechanically-linked relay (safety) outputs for the EZ-SCREEN System. See Banner data sheet p/n 62822 for
more information.
Interface module (3 N.O. redundant-output 6 amp contacts)
IM-T-9A
Interface module (2 N.O. redundant-output 6 amp contacts, plus 1 N.C. auxiliary contact)
IM-T-11A
Contactors
If used, two contactors per EZ-SCREEN Type 2 System are required.
10 amp positive-guided contactor 3 N.O., 1 N.C.
11-BG00-31-D-024
18 amp positive-guided contactor 3 N.O., 1 N.C. (N.C. contact rated @ 10 amps)
BF1801L024
Lens Shield
Constructed of 1.5 mm clear polycarbonate; attach to sensor using supplied adhesive-backed Neoprene foam strips.
NOTE: The total range decreases by approximately 10% per shield.
Sensor Defined Area Height
Lens Shield Model
Lens Shield Length
150 mm
LSS-150
210 mm (8.3")
300 mm
LSS-300
360 mm (14.2")
450 mm
LSS-450
510 mm (20.1")
600 mm
LSS-600
660 mm (26.0")
750 mm
LSS-750
810 mm (31.9")
900 mm
LSS-900
959 mm (37.8")
1050 mm
LSS-1050
1109 mm (43.7")
1200 mm
LSS-1200
1259 mm (49.6")
1350 mm
LSS-1350
1409 mm (55.5")
1500 mm
LSS-1500
1558 mm (61.3")
1650 mm
LSS-1650
1708 mm (67.2")
1800 mm
LSS-1800
1858 mm (73.1")
EZ-SCREEN® Type 2 Light Screen Instruction Manual
60
www.bannerengineering.com - tel: 763-544-3164
122452 rev. B