Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 28)

The other wires are for an optional hookup that allows for parallel connection (color-for-color) to the receiver cable. This optional hookup
provides for sensor interchangeability (or swapability) that facilitates installing either sensor at either QD connection. Besides providing
similar cabling, this wiring scheme is advantageous during installation, wiring, and troubleshooting.
Individual Cordsets Splitter Cordsets
EZ-SCREEN Type 2
Bn
Or/Bk
Or
Wh
Bk
Bu
Gn/Ye
Vi
+24V dc
C
n.c.
n.c.
OSSD2
OSSD1
0V dc
Ground
Reset/Test & EDM
A
B
D
C
A
B
Key Description
A Emitter
B Receiver
C QDE-8..D Cordsets
Key Description
A Emitter
B Receiver
C DEE2R.. Cordsets
D CSB.. Cordsets
Initial Checkout Procedure
The initial checkout procedure must be performed by a Qualified Person. It must be performed only after configuring the system and after
connecting the emitter and receiver.
The procedure is performed on two occasions:
• To ensure proper installation when the System is first installed
• To ensure proper System function whenever any maintenance or modification is performed on the System or on the machinery being
guarded by the System.
EZ-SCREEN® Type 2 Light Screen Instruction Manual
28 www.bannerengineering.com - tel: 763-544-3164 122452 rev. B