Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 59)

Splitter Cordsets
Model CSB splitter cordsets allow easy interconnection between an EZ-SCREEN Type 2 8-pin receiver and its 8-pin emitter, providing a
single “homerun” cable for the optional “swapable” hookup (see Figure 3-11). The model DEE2R-.. double-ended cables described on
page 8 may be used to extend the lengths of the QD trunk, branch #1, or branch #2. (Branch #1 and branch #2 cable sections are 300
mm/1' long.) The model QDE-8..D single-ended cables may be used to extend the QD trunk for cut-to-length applications.
Model Number Length Wire
CSB-M1281M1281 300 mm (1') Trunk 22 AWG/
0.33 mm
2
CSB-M1288M1281 2.5 m (8') Trunk
CSB-M12815M1281 5 m (15') Trunk
CSB-M12825M1281 8 m (25') Trunk
CSB-UNT825M1281 8 m (25') Trunk (untermi-
nated)
Pin #1 (+24V dc)
Pin #2 (n.c.)
Pin #3 (n.c.)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET) Pin #1 (+24V dc)
Pin #2 (n.c.)
Pin #3 (n.c.)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET)
Pin #1 (+24V dc)
Pin #2 (n.c.)
Pin #3 (n.c.)
Pin #4 (OSSD#2)
Pin #5 (OSSD#1)
Pin #6 (0V dc)
Pin #7 (GND)
Pin #8 (RESET)
M12 Male
or
unterminated
M12 Female
M12 Female
EZ-SCREEN® Type 2 Light Screen Instruction Manual
122452 rev. B www.bannerengineering.com - tel: 763-544-3164 59