Metrohm 784 KFP Titrino User Manual
Page 90
3.2 Remote control commands
784 KFP Titrino
85
3.2.2.83. Setup.Keycode
ON, OFF
ON means the key code of a key pressed on the Titrino is outputted. The key
code comprises 2 ASCII characters; table of the keys with their code, see
page 102. A keystroke of key 11 is sent as follows:
#11
The beginning of the message is marked by a space (ASCII 32).
3.2.2.84. Setup.Tree.Short
ON, OFF
Setup.Tree.ChangedOnly
ON, OFF
Definition of the type of answer to $Q.
.Short:
With "ON", each path is sent with only the necessary amount of
characters in order to be unequivocal (printed in bold in this manual). A com-
bination of .Short and .ChangedOnly is not possible.
.ChangedOnly:
Sends only the changed values, i.e. values which have
been edited. All paths are sent absolute, i.e. from the root.
3.2.2.85. Setup.Trace
ON, OFF
The Titrino automatically reports when a value has been confirmed with
&SmplData.OFFSilo.Id1"Trace"
The beginning of the message is marked by a space (ASCII 32).
3.2.2.86. Setup.Lock.Keyboard
ON, OFF
Setup.Lock.Config
ON, OFF
Setup.Lock.Parameter
ON, OFF
Setup.Lock.SmplData
ON, OFF
Setup.Lock.UserMeth.Recall
ON, OFF
Setup.Lock.UserMeth.Store
ON, OFF
Setup.Lock.UserMeth.Delete
ON, OFF
Setup.Lock.Display
ON, OFF
ON means disable the corresponding function:
.Keyboard: Disable all keys of the Titrinos
.Config:
Disable the
.Parameter: Disable the
.SmplData: Disable the
.UserMeth.Recall: Disable "recall" in
.UserMeth.Store: Disable "store" in
.UserMeth.Delete: Disable "delete" in
.Display: Disable the display, i.e. it will not be written to by the device pro-
gram of the Titrino and can be operated from the computer.