Metrohm 784 KFP Titrino - Manual (Page 69)

3.2 Remote control commands
784 KFP Titrino
64
&Setup
Object Description Input range Reference
& Root
:
├
Setup Settings for the operating mode
├
.Comport Output of automatic info 1,2,1&2 3.2.2.82.
├
.Keycode Send key code ON, OFF 3.2.2.83.
├
.Tree Sending format of path info
│ ├
.Short Short format of path ON, OFF 3.2.2.84.
│ ├
.ChangedOnly Paths of modified nodes only ON, OFF ditto
│
├
.Trace Message on changed values ON, OFF 3.2.2.85.
│
├
.Lock Lock key functions
│ ├
.Keyboard Lock all keyboard keys ON, OFF 3.2.2.86.
│ ├
.Config Lock key ON, OFF ditto
│ ├
.Parameter Lock key ON, OFF ditto
│ ├
.SmplData Lock key ON, OFF ditto
│ ├
.UserMeth Lock functions
│ │ ├
.Recall Lock “loading” ON, OFF ditto
│ │ ├
.Store Lock “saving” ON, OFF ditto
│ │ ├
.Delete Lock “deletion” ON, OFF ditto
│ └
.Display Lock display function ON, OFF ditto
│
├
.Mode Setting waiting intervals
│ ├
.StartWait Waiting time after start ON, OFF 3.2.2.87.
│ ├
.FinWait Waiting time after run ON, OFF ditto
│
├
.SendMeas Automatic sending of measured values
│ ├
.SendStatus Connect/disconnect sending ON, OFF 3.2.2.88.
│ ├
.Interval Time interval 0.08...4...16200, ditto
│
MPList
│ ├
.Select Selection Assembly, Titrator 3.2.2.89.
│ ├
.Assembly From assembly
│ │ ├
.CyclNo Cycle number ON, OFF 3.2.2.90.
│ │ ├
.V Volume ON, OFF ditto
│ │ ├
.Meas Measured indicator voltage ON, OFF ditto
│ ├
.Titrator From Titrator
│ │ ├
.CyclNo Cycle number ON, OFF 3.2.2.91.
│ │ ├
.V Volume ON, OFF ditto
│ │ ├
.Meas Measured indicator voltage ON, OFF ditto
│ │ ├
.dVdt Volume drift dV/dt ON, OFF ditto
│ │ ├
.dMeasdt Measured value drift ON, OFF ditto
│ │ ├
.dMeasdV 1st deviation of titration curve ON, OFF ditto
│