Metrohm 813 Compact Autosampler - Manual (Page 29)

3 Operation
813 Compact Autosampler
23
3.2.1 Course of configuration
Init
Power on +
Select method 1...4
Set work position
(move lift)
Ready
Ready
Init
Fig. 16 Configuration
If you just want to select a method:
1. Switch off Autosampler.
2. Press and simultaneously switch on Autosampler.
The green LED blinks.
3. Press again, to select method 1. The red LED
blinks slowly. To select method 2 press again. The
red LED blinks double times.
To select method 3 or 4 press again. The red LED
will display the selected method by the blinking frequency.