Metrohm 813 Compact Autosampler - Manual (Page 12)

2.1 Setting up the instrument
6
813 Compact Autosampler
2 Installation
2.1 Setting up the instrument
2.1.1 Packaging
The 813 Compact Autosampler is supplied together with the
separately packed accessories in special packagings containing
shock-absorbing foam linings designed to provide excellent pro-
tection. The actual instrument is packed in an evacuated polyeth-
ylene bag to prevent the ingress of dust. Please store all these
special packagings as only they can assure damage-free trans-
port of the instrument.
2.1.2 Delivery check
After receipt, immediately check whether the shipment is com-
plete and undamaged (compare with delivery note and list of ac-
cessories in section 4.6). In the case of transport damage, see in-
structions in section 4.5.1 "Warranty".
2.1.3 Location
Position the instrument in the laboratory at a location convenient
for operation, free from vibrations and protected against a corro-
sive atmosphere and contamination by chemicals.
Do not operate the 813 Compact Autosampler without splash
protection 1 and plug cover 20 being installed!
Take precautions to ensure that any leaks from pump tubings or
connections cannot cause more damage.
Take precautions to ensure that any leaks from pump tubings or
connections cannot cause more damage.