Gimbal description – DJI Z15-GH4 (HD User Manual
Page 7

©2014 DJI. All Rights Reserved.
7
Gimbal Description
To avoid motor damage, ensure there is nothing blocking the rotation of the servo drive modules.
Clear obstacles or immediately cut off the power if any blockage occurs.
The servo drive modules have two motor command input ports and one private encoder port.
The HDMI-HD/AV module converts HDMI to HD (or AV) using a cable connected to the camera HDMI
port; it also transforms the TX signal into a shutter control signal by using a shutter control cable.
The camera shutter control cable is removable. Unplug it if this functionality is not needed.
Servo Drive
Module 1
Damping Unit
Tilt±+
50°/ -140°
Arrow
represents
the lens direction
Receiver Mount Board
Servo Drive
Module 3
Lens Retaining Ring
Mount Hole
Camera Mount
Position
IMU Module
Camera
LED
Indicator
AV
/
HD
Switch
HDMI-
AV
/
HD
Module
9-Pin Port
To G9 port of GCU
Motor Input Port
To G6 port of GCU
Roll
±
40°
Servo Drive
Module 2
Camera Shutter
Control Cable
Camera Mount
Holes
Gimbal Description