DJI Z15-GH4 (HD - Manual (Page 26)

26
©2014 DJI. All Rights Reserved.
Zenmuse Z15-GH4 ( HD ) User Manual
Specifications
General
Built-In Functions Three Working Modes
Orientation-locked control
Non orientation-locked control
FPV mode (Reset)
Built-in independent IMU module
DJI gimbal special servos drive module
HDMI- HD/AV module
Wireless video transmission
supported
Camera shutter control supported
Wide range voltage input
supported
S-Bus/PPM Receiver supported
Peripheral
Supported Camera Panasonic GH4/GH3
Supported Lens OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0
GCU Input Power 4S~12S LiPo (Recommend 6S if with S800 EVO or S1000)
Control Requirement At least four spare receiver channels
Assistant Software System
Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mechanical & Electrical Characteristics
Working Current Static current: 200mA (@25V)
Dynamic current: 400mA (@25V)
Locked-rotor current: 4A (@25V)
Operating Temperature -10°C ~ 50°C
Weight 1.26Kg
Dimensions 233mm x 210mm x 192mm
GCU Weight 63g
GCU Dimensions 64.2 mm × 34.1mm × 19.5mm
Working Performance
Load Weight (Reference Value) 690g(@Panasonic GH4 with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0,
Battery and SD Card)
Controlled Angle Accuracy ±0.01°
Maximum Controlled
Rotation Speed*
Pan axis: ±130°/s
Tilt axis: ±130°/s
Roll axis: ±30°/s
Controlled Rotation Range Pan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°
Note*: Gimbal’s Maximum Controlled Rotation Speed corresponds to TX stick input pushed to 100% end-points.
Appendix