DJI Z15-GH4 (HD - Manual (Page 20)

20
©2014 DJI. All Rights Reserved.
Zenmuse Z15-GH4 ( HD ) User Manual
Pre-Flight Check
Ensure the gimbal is properly installed and attached to the landing gear, and that the camera is
mounted correctly and securely.
Before powering on, spin the gimbal through its complete rotation by hand on each axis to ensure
nothing is blocking its movement.
Ensure all cables are connected correctly, without any plugged in backwards or into the wrong ports.
Ensure the AV video power cable is properly soldered and shielded if an AV video transmission module
is used.
Verify TX settings.
Ensure the camera shutter control cable is correctly mounted.
Ensure the camera menu options and settings are correct.
Verify a proper connection between the GCU and the RC receiver.
Verify a proper connection between the GCU and the flight control system.
Ensure the latest Flight Control System Main Controller firmware is installed.
Refer to the Gimbal LED Indicator section in the Appendix to understand the connection status
between the camera and gimbal.
Refer to the Troubleshooting section in the Appendix if an abnormal situation occurs.
Pre-Flight Check