Mounting a gh3 camera onto the z15-gh4 – DJI Z15-GH4 (HD User Manual

Page 12

Text mode
Original mode

Zenmuse Z15-GH4

(

)

User Manual

Mounting a GH3 Camera onto the Z15-GH4

Mount a GH3 camera onto Z15-GH4 gimbal with the included HDMI cable made specifically for a GH3
camera. Follow the steps below to complete the mounting process:
1. Loosen the screws on the HDMI cap.

Mounting a GH3 Camera onto the Z15-GH4

2. Unplug the GH4 HDMI cable from the board. Then plug the specified HDMI cable for a GH3 camera into

the board. Be aware of the HDMI cable connection. Ensure that the connector is used as shown below:

3. Re-install the HDMI cap and tighten the screws to finish.

Screw

HDMI Cap

Board

HDMI cable for GH3

The following diagram shows how the shutter control works.

2-Position Switch

TX Command

Wireless

RC Receiver

3-Pin Cable

Internal Cable

HDMI-HD/AV

Module

Gimbal

Camera

GCU

Shutter Button

2-Position

Switch Channel

SHUT

Camera Shutter Control Cable