Upgrade, Info – DJI Z15-GH4 (HD User Manual

Page 19

Zenmuse Z15-GH4

(

)

User Manual

PC Assistant Tuning

Upgrade

You can view the latest firmware version information on this page. Upgrade the firmware by following the
steps below:
1. Connect the gimbal to your computer with a Micro-USB cable, and wait until the blue indicator LED in the

Assistant software is blinking.

2. Click “Upgrade”.
3. Wait for the download to finish.
4. Click “Upgrade” again and then click “Confirm”.
5. Power cycle the gimbal (turn it off, then on again) after the upgrade is complete.

Ensure your computer is connected to the internet.

Close any antivirus programs and network firewalls during the upgrade.

Ensure the gimbal is powered on during the upgrade.

Do not disconnect the USB cable during the upgrade.

Info

You can check the Assistant version via Info.
S/N is a 32 digit authorization code for function activations. The authorization code for your unit is filled in at
the time of manufacture. In the future, you may be asked to fill in a new S/N if you require function upgrades.
Fill in the S/N and then click the Write button. If you fill in an invalid S/N more than 30 times, your gimbal will be
locked and you will have to contact our customer support.