In the box, Gimbal ×1, Gimbal control unit (gcu) × 1 – DJI Z15-GH4 (HD User Manual

Page 4: Lens retaining ring × 1, Mounting bracket × 4, Mounting board for receiver × 1, Cable clamp × 1, Camera mount screw × 1, Lens retaining ring screw × 1

In the Box

Gimbal ×1

The Z15-GH4 gimbal includes built-in servo drive
modules, an independent IMU module, a camera
shutter control module and a HDMI-HD/AV module.

Gimbal Control Unit (GCU) × 1

Connect the GCU to your Flight Control System using
the CAN-Bus. The GCU will control the gimbal’s pan,
roll and tilt movements.

GH4

GCU

ROLL

TILT

PAN

MODE

SHUT

AUX1

AUX2

AUX3

Lens Retaining Ring × 1

For mounting the camera lens.

Mounting Bracket × 4

For mounting the gimbal to the landing gear.

Mounting Board for Receiver × 1

For attaching the GCU and providing a convenient
mount for the receiver or other devices.

Cable Clamp × 1

For cable management.

Camera Mount Screw × 1

A standard tripod mounting screw.

Lens Retaining Ring Screw × 1

For attaching the lens retaining ring to the gimbal.

In the Box